Online Alışveriş Sitemize Hoşgeldiniz.

0(216) 466 41 47
0(530) 265 13 93

Cart:

0 item(s) - 0,00 TL
Sepetinizde hiç ürün yok.

0

Diğer Görünümler

Hakel SPC25 DS/3+1

Durumu: stokta mevcut

Only 1 left

865,00 TL

Hızlı Gözat

ÜRÜN AÇIKLAMASI : ÜRÜN SIFIR KUTUSUNDADIR

Detaylar

  • Hakel SPC25 DS/3+1 

    SPC25DS/3+1 
    SPC25DS/3+1 

    The SPC25 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC25 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

    The main use of SPC25 arrester is in structures of LPL I according to EN 62305, e.g. hospitals, banks, mobile operator stations, water-stations, power plants, airport buildings for air traffic control and all structures with explosive risk.

    To be installed in the main switchboard.

    Function of remote monitor terminals 
    When the SPC25 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

     

    Type SPC25DS/3+1
    Max. continuous operating voltage 
    UC 
    275 
    V AC
     
    Lightning impulse current (10/350) 
    Iimp 
    25 
    kA 
    Impulse current (10/350) N/PE
     
    Iimp 
    100 
    kA 
    Nominal impulse discharge current (8/20) 
    In 
    25 
    kA 
    Voltage protection level 
    Up 
    < 1,2 
    kV 
    Temporary overvoltage (TOV) L/N 
    UT 
    335/5 
    V/sec 
    Temporary overvoltage (TOV) N/PE 
    UT 
    1200/0,2 
    V/sec 
    Max. back-up fuse 
     
    250 
    AgL/gG 
    Article number
     
    10632 
     



Ek Bilgi

Ürün Kodu GM-2076/MG3

Ürün Etiketleri

Etiketleri ayırmak için boşluk kullanınız. Deyim tipindeki etiketler için tekli tırnak (') kullanınız.