Online Alışveriş Sitemize Hoşgeldiniz.

0(216) 466 41 47
0(530) 265 13 93

Cart:

0 item(s) - 0,00 TL
Sepetinizde hiç ürün yok.

0

Diğer Görünümler

MultiCon CMC I/O Modules M99-TC4-001

Durumu: stokta mevcut

Only 2 left

175,00 TL

Hızlı Gözat

ÜRÜN AÇIKLAMASI : ÜRÜN SIFIR AMBALAJINDADIR

Detaylar

MultiCon CMC I/O Modules M99-TC4-001 Input modules - thermocouple The range of TC modules consist of 4, 8 and 12 thermocouple input modules, each equipped with 1 input for connectors temperature measurement. Primary destination of these modules is temperature measurement using thermocouple sensors, but it is also possible to measure voltage with typical thermocouple ranges. TC modules parameters are: - Name - read-only input name given by the device, - Unit - read-only field which displays „°C” or „mV”, depending on Mode parameter settings, - Mode - allows to set type of thermocouple or mV measurement range, - Low limit - defines measurement level below which in logical channel „Lo” state will be displayed, - High limit - defines measurement level above which in logical channel „Hi” state will be displayed, - Wire compensation - allows to compensate measurement errors, which can be caused by wrong sensor readings, - Compensation - parameter which allows to manually compensate sensor error, written here value is added or subtracted from measured sensor value, - Actual temperature - parameter in which user enters actual temperature near the sensor, which is measured by a more reliable thermometer, - Compensate - button which activates the compensation, - Compensation - read only parameter; displays voltage value calculated to compensate temperature measurement. TECHNICAL DATA Measurement range Hardware limitation thermocouple J, K, S, T, N, R, B, E (PN-EN), L (GOST); voltage: -10 ÷ 25 mV, ±25 mV, -10 ÷ 100 mV, ±100 mV -30 mV ÷ 30 mV, -120 mV ÷ 120 mV Hardware resolution 1 µV (± 30 mV), 4 µV (± 120 mV) Permissible long time overload 20% Permissible voltage difference 0.5 V between channels Input impedance typ. 1 MΩ Sampling period 385 ms * Part number M99-TC4-001

Ek Bilgi

Ürün Kodu GM-1802/4

Ürün Etiketleri

Etiketleri ayırmak için boşluk kullanınız. Deyim tipindeki etiketler için tekli tırnak (') kullanınız.